CARBON STEEL
PIPES -----SEAMLESS PIPES FOR API CASING AND TUBING
AVAILABLE SPECIFICATIONS : API 5CT
STEEL GRADE : J55 , K55 , L80 , N80 , P110
DIMENSION TABLE
|
API CASING
|
|||||||
|
Designation
|
Outside Diameter(mm)
|
WallThickness (mm) |
Type
of End Finish
|
||||
|
Size(inch)
|
Weight(lb/ft)
|
GradeJ55 / K55
|
GradeL80
|
GradeN80
|
GradeP110
|
||
| 5 | 11.50 | 127 | 5.59 | PS | - | - | - |
| 5 | 13.00 | 127 | 6.43 | PSL | - | - | - |
| 5 | 15.00 | 127 | 7.52 | PSLB | - | - | - |
| 5 | 18.00 | 127 | 9.19 | - | PLB | PLB | PLB |
| 5 | 21.40 | 127 | 11.10 | - | PLB | PLB | PLB |
| 5 | 23.20 | 127 | 12.14 | - | PLB | PLB | PLB |
| 5 | 24.10 | 127 | 12.70 | - | PLB | PLB | PLB |
| 5-1/2 | 14.00 | 139.70 | 6.20 | PS | - | - | - |
| 5-1/2 | 15.50 | 139.70 | 6.98 | PSLB | - | - | - |
| 5-1/2 | 17.00 | 139.70 | 7.72 | PSLB | PLB | PLB | PLB |
| 5-1/2 | 20.00 | 139.70 | 9.17 | - | PLB | PLB | PLB |
| 5-1/2 | 23.00 | 139.70 | 10.54 | PLB | PLB | PLB | |
| 6-5/8 | 20.00 | 168.28 | 7.32 | PSLB | - | - | - |
| 6-5/8 | 24.00 | 168.28 | 8.94 | PSLB | PLB | PLB | PLB |
| 6-5/8 | 28.00 | 168.28 | 10.59 | - | PLB | PLB | PLB |
| 6-5/8 | 32.00 | 168.28 | 12.06 | - | PLB | PLB | PLB |
| 7 | 20.00 | 177.80 | 6.91 | PS | - | - | - |
| 7 | 23.00 | 177.80 | 8.05 | PSLB | PLB | PLB | - |
| 7 | 26.00 | 177.80 | 9.19 | PSLB | PLB | PLB | PLB |
| 7 | 29.00 | 177.80 | 10.36 | - | PLB | PLB | PLB |
| 7 | 32.00 | 177.80 | 11.51 | - | PLB | PLB | PLB |
| 7 | 35.00 | 177.80 | 12.65 | - | PLB | PLB | PLB |
| 7 | 38.00 | 177.80 | 13.72 | - | PLB | PLB | PLB |
| 7-5/8 | 26.40 | 193.68 | 8.33 | PSLB | PLB | PLB | - |
| 7-5/8 | 29.70 | 193.68 | 9.52 | - | PLB | PLB | PLB |
| 7-5/8 | 33.70 | 193.68 | 10.92 | - | PLB | PLB | PLB |
| 7-5/8 | 39.00 | 193.68 | 12.70 | - | PLB | PLB | PLB |
| 7-5/8 | 42.80 | 193.68 | 14.27 | - | PLB | PLB | PLB |
| 7-5/8 | 45.30 | 193.68 | 15.11 | - | PLB | PLB | PLB |
| 7-5/8 | 47.10 | 193.68 | 15.86 | - | PLB | PLB | PLB |
| 8-5/8 | 24.00 | 219.08 | 6.71 | PS | - | - | - |
| 8-5/8 | 32.00 | 219.08 | 8.94 | PSLB | - | - | - |
| Remarks - - - P -- plain end ;S -- short , round threaded;L -- long , round threaded;B - buttress thread ;The densities of martensitic chromium steel ( L80 types9Cr amd 13 Cr ) are different from carbon steel.The weight shown are thereofore not accurate for Martensitic chromium steels. A weight correction factor of 0.989 may be used . |
|||||||
|
API
TUBING
|
|||||||
|
Designation (inch) |
Weight
Designation
|
Outside Diameter(mm) |
WallThickness (mm) |
Type
of End Finish
|
|||
|
NonupsetT&C
|
External- UpsetT & C
|
GradeJ55
|
GradeL80
|
GradeN80
|
|||
| 1.050 | 1.14 | 1.2 | 26.67 | 2.87 | PNU | PNU | PNU |
| 1.050 | 1.48 | 1.54 | 26.67 | 3.91 | PU | PU | PU |
| 1.315 | 1.70 | 1.80 | 33.4 | 3.38 | PNU | PNU | PNU |
| 1.315 | 2.19 | 2.24 | 33.4 | 4.55 | PU | PU | PU |
| 1.660 | - | - | 42.16 | 3.18 | P | - | - |
| 1.660 | 2.30 | 2.40 | 42.16 | 3.56 | PNU | PNU | PNU |
| 1.660 | 3.03 | 3.07 | 42.16 | 4.85 | PU | PU | PU |
| 1.900 | - | - | 48.26 | 3.18 | P | - | - |
| 1.900 | 2.75 | 2.90 | 48.26 | 3.68 | PNU | PNU | PNU |
| 1.900 | 3.65 | 3.73 | 48.26 | 5.08 | PU | PU | PU |
| 1.900 | 4.42 | - | 48.26 | 6.35 | - | P | - |
| 1.900 | 5.15 | - | 48.26 | 7.62 | - | P | - |
| 2.063 | - | - | 52.40 | 3.96 | P | P | P |
| 2.063 | 4.50 | - | 52.40 | 5.72 | P | P | P |
| 2-3/8 | 4.00 | - | 60.33 | 4.24 | PN | PN | PN |
| 2-3/8 | 4.60 | 4.70 | 60.33 | 4.83 | PNU | PNU | PNU |
| 2-3/8 | 5.80 | 5.95 | 60.33 | 6.45 | - | PNU | PNU |
| 2-3/8 | 6.60 | - | 60.33 | 7.49 | - | P | - |
| 2-3/8 | 7.35 | 7.45 | 60.33 | 8.53 | - | PU | - |
| 2-7/8 | 6.40 | 6.50 | 73.03 | 5.51 | PNU | PNU | PNU |
| 2-7/8 | 7.80 | 7.90 | 73.03 | 7.01 | - | PNU | PNU |
| 2-7/8 | 8.60 | 8.70 | 73.03 | 7.82 | - | PNU | PNU |
| 2-7/8 | 9.35 | 9.45 | 73.03 | 8.64 | - | PU | - |
| 2-7/8 | 10.50 | - | 73.03 | 9.96 | - | P | - |
| 2-7/8 | 11.50 | - | 73.03 | 11.18 | - | P | - |
| 3-1/2 | 7.70 | - | 88.9 | 5.49 | PN | PN | PN |
| 3-1/2 | 9.20 | 9.30 | 88.9 | 6.45 | PNU | PNU | PNU |
| 3-1/2 | 10.20 | - | 88.9 | 7.34 | PN | PN | PN |
| 3-1/2 | 12.70 | 12.95 | 88.9 | 9.53 | - | PNU | PNU |
| 3-1/2 | 14.30 | - | 88.9 | 10.92 | - | P | - |
| 3-1/2 | 15.50 | - | 88.9 | 12.09 | - | P | - |
| 3-1/2 | 17.00 | - | 88.9 | 13.46 | - | P | - |
| 4 | 9.50 | - | 5.74 | PN | PN | PN | |
| 4 | - | 11.00 | 101.6 | 6.65 | PU | PU | PU |
| 4 | 13.20 | - | 101.6 | 8.38 | - | P | - |
| 4 | 16.10 | - | 101.6 | 10.54 | - | P | - |
| 4 | 18.90 | - | 101.6 | 12.7 | - | P | - |
| 4 | 22.20 | - | 101.6 | 15.49 | - | P | - |
| 4-1/2 | 12.60 | 12.75 | 114.3 | 6.88 | PNU | PNU | PNU |
| - | P | - | 114.3 | 8.56 | |||
| - | P | - | 114.3 | 9.65 | |||
| - | P | - | 114.3 | 10.92 | |||
| - | P | - | 114.3 | 12.70 | |||
| - | P | - | 114.3 | 14.22 | |||
| - | P | - | 114.3 | 16.00 | |||
| Remarks P - plain end ;N - nonupset T & C ;U - external- upset T & C ;Nonupset tubing is availablewith regular couplings or special - bevel couplings.External upset tubing is available with regular, Special-bevel, or special clearance coupling. The densities of martensitic chromium steel ( L80 types9Cr amd 13 Cr ) are different from carbon steel.The weight shown are thereofore not accurate for Martensitic chromium steels. A weight correction factor of 0.989 may be used . |
|||||||
