| |
Pipe
components: Elbows, fittings and flanges
to DIN / EN and ASME / ASTM standards
DIN / EN
|
 |
|
Elbows
and fittings
|
|
 |
Seamless
elbows to DIN 2605, material St 37.0 or St 35.8 class I - 45º 90º
or 180º in 3S or 5S |
|
Welded
carbon steel elbows to DIN 2605, in 90¼ or 180¼ material St 37.0 W
or St. 42.8 |
|
Seamless
tees DIN 2615, material St 35.8 class I |
|
Seamless
eccentric or concentric reducers to DIN 2616, material St 35.8 class
I |
|
Seamless
saddles to DIN 2618, material St 35.8 class I |
|
Seamless
elbows to DIN 2619, material St 35.8 class I |
|
Seamless
caps to DIN 28011, material S235JRG2 - EN10025 (St37) |
|
Seamless
caps to DIN 2617; convex caps DIN 28013-type VA mat. P265GH-EN 10025-boilerplate
HII |
|
Malleable
cast iron fittings to DIN 2950, threaded, black or galvanised |
|
Forged
carbon steel fittings to DIN 2982 up to DIN 2987 threaded, black or
galvanised |
|
| Flanges
|
|
|
Welding
neck flanges to DIN 2631 up to 2637 material S235 JRG2 (St 37.2) or
C22.8 |
|
Flat
welding flanges to DIN 2576 material S235 JRG2 to EN 10025 (St 37.2) |
|
Slip
on flanges to DIN 2642 material S235 JRG2 to EN 10025 (St 37.2) |
|
Rings
(Bunde) as per DIN 2642 material S235 JRG2 to EN 10025 |
|
Blind
flanges to DIN 2527 material C 22.8 to DIN 17243 |
|
Screwed
flanges to DIN 2566 material S235 JRG2 to EN 10025, electrolytically
or full plate galvanised |
|
Slip-on
(collar) flanges to DIN 86030, material C22.8 to DIN 17243 |
|
Flat
welding-, blind- and slip on flanges material S185 to EN 10025 |
ASME / ASTM
|
| Elbows
and fittings |
|
|
Seamless
elbows to ASME B 16.9, Long Radius, material ASTM A234 / ASME SA234
WPB |
|
ditto
in material ASTM A420 / ASME SA 420 WPL6 |
|
ditto
in material ASTM A234 / ASME SA 234 WPL5 |
|
ditto
in material ASTM A234 / ASME SA 234 WPL11 |
|
Seamless
elbows to ASME B 16.28, Short Radius, material ASTM A234 / ASME SA234
WPB |
|
ditto
in material ASTM A420 / ASME SA 420 WPL6 |
|
Welded
elbows ASME B 16.9, Long Radius, material derived from ASTM A234 /
ASME SA234 WPB |
|
Concentric
and eccentric reducers ASME B 16.9, material ASTM A234 / ASME SA234
WPB |
|
ditto
in material ASTM A420 / ASME SA 420 WPL6 |
|
ditto
in material ASTM A234 / ASME SA 234 WPL5 |
|
ditto
in material ASTM A234 / ASME SA 234 WPL11 |
|
Equal
and reducing tees toASME B 16.9, material ASTM A234 / ASME SA234 WPB |
|
ditto,
material ASTM A420 / ASME SA 420 WPL6 |
|
ditto,
material ASTM A234 / ASME SA 234 WPL5 |
|
ditto,
material ASTM A234 / ASME SA 234 WPL11 |
|
Caps
to ASME B 16.9, material ASTM A234 / ASME SA234 WPB |
|
ditto,
material ASTM A420 / ASME SA 420 WPL6 |
|
ditto,
material ASTM A234 / ASME SA 234 WPL5 |
|
ditto,
material ASTM A234 / ASME SA 234 WPL11 |
|
Forged
carbon steel fittings to ASME B 16.11, BS 3799, or MSS SP 79/83 material
to ASTM A 105 / ASME SA 105N, 3000 / 6000 Lbs, in black or galvanised
execution |
|
Forged
carbon steel O-lets to ASME B 36.10 / MSS SP 79, 3000 / 6000 Lbs |
|
| Flanges |
|
|
Welding
neck flenzen to ASME B 16.5, material to ASTM A 105 / ASME SA105N
/ C21 |
|
ditto,
material LF2 in accordance with ASTM A 350/ASME SA 350N |
|
ditto,
material F5 in accordance with ASTM A182/ASME SA 182 |
|
ditto,
material F11 class 2 in accordance with ASTM A182/ASME SA 182 |
|
Long
welding neck flanges to ASME B 16.5, material ASTM A 105 / ASME SA105N/C21 |
|
Ditto,
material LF2 in accordance with ASTM A350/ASME SA350N |
|
Slip
on flanges to ASME B 16.5, material ASTM A 105 / ASME SA 105N/C21 |
|
ditto,material
LF2 in accordance with ASTM A350/ASME SA350N |
|
Bllind
flanges to ASME B 16.5, material ASTM A 105 / ASME SA 105N/C21 |
|
ditto,
material LF2 in accordance with ASTM A 350/ASME SA 350N |
|
ditto,
material F5 in accordance with ASTM A182/ASME SA 182 |
|
ditto,
material F11 class 2 in accordance with ASTM A182/ASME SA 182 |
|
Socket-weld
flanges to ASME B 16.5, material ASTM A105/ASME SA105N/C21 |
|
Screwed
flanges to ASME B 16.5, material ASTM A 105 / ASME SA 105N/C21 |
|
ditto,
but full plate galvanised in accordance with ASTM A123/ASME SA 123 |
|
Lap-joint
flanges to ASME B 16.5, material ASTM A105/ASME SA105N/C21 |
|
Cover
flanges as per drawing S38.046D en ASME B 16.5, material ASTM A105/ASME
SA105 |
|
| Page1
Page2 |
|
|
|
